CT10 INFORMATION SHEET

CT10 Specification Sheet

Ceiling/In-wall Loudspeaker Delivering High Quality Sound and Wide Sonic Dispersion

The Sound Advance CT10B ™ Series delivers extended bandwidth and wide dispersion with a Flat Panel design for application in commercial and residential installations.

Employing Sound Advance's patented Flat Panel Diaphragm Technology™ the CT10B radiates sound in a smooth, hemispherical pattern with over 140º of sound coverage. Because of its wide sound dispersion pattern, fewer CT10B loudspeakers are required to meet the same performance of conventional, narrow dispersion ceiling or in-wall loudspeakers. As a result, CT10B speakers can be spaced farther apart, reducing the total quantity of loudspeakers required for almost any installation which dramatically reduces the total system cost.

The surface of the CT10B utilizes Expanded polystyrene™ creating a smooth surface which may be finished with water soluble materials such as latex paints to match any color or decor requirement. With its paintable surface and no unsightly speaker grille, the CT10B blends easily into any decor

Designed for easy installation, the CT10B is mounted using either a standard screw type or torsion spring mounting configuration. All CT10B Series models flush mount into conventional drop ceiling tiles, sheetrock, stucco walls or ceilings up to one inch thick. CT10B Series speakers use industry standard 8" loudspeaker mounting accessories and will retro-fit into almost all existing standard 8" diameter openings.

CT10BH - 8ohm, with hardware for standard screw mounting

CT10HT - as above with 8W/70.7V or 100V transformer

CT10BS - 8ohm, with hardware for torsion spring mounting

CT10BST - as above with 8W/70.7V or 100V transformer

UAEY - UL Control #9P03. UL models listed below must be used with UL listed backcans. Call factory for UL listed backcan models.

CT10BHG - General Signaling 8ohm, with hardware for standard screw mounting

CT10HTG - as above with 8W/70.7V or 100V transformer

CT10BSG - General Signaling 8ohm, with hardware for torsion spring mounting

CT10BSTG - as above with 8W/70.7V or 100V transformer

UUMW - UL Control #7P97. UL models listed below must be used with UL listed backcans. Call factory for UL listed backcan models.

CT10BHTF - Fire Protective Signaling, with 8 Watt, field selectable, multi-tap 70.7 volt transformer and hardware for standard screw mounting

CT10BSTF - Fire Protective Signaling, with 8 Watt, field selectable, multi-tap 70.7 volt transformer and hardware for torsion spring mounting

Fire Protective UL Listed models supplied with Dual Leads and 150WDC Blocking Capacitor for Line Supervision.

PBB8-10 Industry standard stackable enclosure (backcan).

TBS8-10 T-bar / Torsion Mount Support Bridge, for use with or without backcan.

ECS The Sound Advance Systems’ ECS -Enclosure Compensation System- is a plug-in type, line level modular device designed to be used exclusively with a range of Sound Advance Systems’ loudspeakers.

ECS810B-4: Sound Advance PBB8-10 or similar enclosure with a total volume of no less than 0.15 ft3 and no more than 0.20 ft3

ECS810B-7: Atlas Soundolier 95-8-7 or similar enclosure with a total volume of no less than 0.20 ft3 and no more than 0.40 ft3

ECS810B-10: Atlas Soundolier 95-8-10 or similar enclosure with a total volume of no less than 0.40 ft3 and no more than 0.70 ft3