PRICING

Prices are prior to UK Carraige and VAT

FM1 Series
CT8B/10B/12F™ Series
CT73S/CT73D™ Series
BT82™ Series
SA2B™ Series

The SOUND ADVANCE SA2B is a two-way, full-range planar loudspeaker system designed for application in commercial and residential installations. Its proprietary structural and engineering features make it possible to invisibly install in almost any standard wood/metal stud wall or ceiling, essentially becoming an integral part of the wall or ceiling surface. Because of the SA2B's patented Planar Diaphragm Technology™, when properly installed in a wall or ceiling, the loudspeaker system will radiate in a smooth, even coverage hemispherical pattern with more than 140° of dispersion throughout its bandwidth. The SOUND ADVANCE SA2B employs a flat rigid diaphragm, approximately one-half inch thick that installs into a standard wall cavity replacing the equivalent surface area of gypsum board. The flat vellum overlay which is applied to the loudspeaker surface may be finished with water soluble materials such as latex paints, to match any color or decor requirement, using conventional brush-on, roller, or airless spray application systems. Additionally, the SA2B may be covered using wallpaper, lightweight vinyl wall coverings and selected textured coatings. The SA2B's exclusive installation methods, including the use of matching surface treatments, uniquely allows the speaker to be made truly invisible. This capability allows the loudspeaker system to be placed wherever optimal acoustics dictate, eliminating any visual concerns. The SA2B utilizes a mechanically derived crossover centered at 1 kHz with a 12dB per octave slope for both low frequency and high-frequency sections. Each loudspeaker contains two independent protection circuits (high-frequency and low-frequency) that automatically reset after an overload condition has been removed.

SA2 Series Loudspeakers